How to Change the Wheels and Bearings on a Scooter

This is a simple video to help you with your scooter maintenance.

Okay, so today we are going to change the wheels and bearings on this scooter. What we should need are new wheels, new bearings, speed cream, Allen wrenches, piece of towel and a scooter. Okay. So, what we are going to want to do is take you Allen wrench, put it on the socket where you are acting now and loosen it up, just like this. Now, when you wheel it over, do not be alarmed it is suppose to happen. Hold the bearing. Now, take your old bearing up all the way to put Allen wrench in kind of angle and just pound it on the end like this and just put that out with a finger, like that. So, I do not want this hanging to the wheels. Some I am kind of throw it over there. I want my new jacks and my brand new Bones Reds bearings. Newly fresh, but that was clearly. So, what you are going to do is get your old spacer from over there and take two bearings, one, two, and put one in this side. Take this, kind of push it in or get a or whatever you want to do and spacer on the middle, make it to the middle like perfectly straight to one another. There, straight. And put the other bearing on top of that nose tip. Yes, really hard. I have a mallet. Take your bearing. Take this and kind of that will get a room. There you go with the bearings and your wheels. Okay, in this kind of, I will toss it later because it is kind of dirty. There you go. I thought to wipe all. Here we are. I like to put a little of speed cream on the axle area inside the wheels so I do not miss. I am not leaving a space, a little of that, and it is kind of wheel reeling. Yes. You can wind it up. Put your Allen wrench into the other side. Wow, might as well take the other as well to enough make it straight or bear at me. Put this end. Put the Allen wrench like this. So, put it into one side and you bring it back down. Just put up that after and put it in. Put the wheel and over hand and take your Allen wrench like this to the port. Oh, yes, with new bearings, it takes about hours to break it in the bearings. So, do not get disappointed if you do not roll soon after viewing this yet.